Parts Incoming Inspection: Building Quality Foundations with "Millimeter-Level Seriousness"

At MAXLOAD, parts incoming inspection is a "millimeter-level seriousness" process:

Dual Checks on Appearance and Dimensions:  we use calipers to "precisely scan" parts such as shock absorbers, cover plates, and lower tubes —— from checking if the airbag has cracks or defects to ensuring dimensions fully match the drawings, every detail is manually reviewed. This is not nitpicking, but making "low stance" precise and controllable from the source.

Confidence from ISO/TS 16949 Certification: All parts are produced in-house, strictly following the ISO/TS 16949 standard. This means every MAXLOAD part you see has undergone stricter tolerance control —— not "almost right", but "absolutely precise".

0.01mm-level control, making parts ‘obedient

Using drawings as a ruler, rejecting any deviation

Manual re-inspection, filtering out all defects

Final Product Inspection: 24-Hour Immersion Test, Making "Air Leakage" a Thing of the Past

The airbag is the "heart" of the air suspension, and we use a "24-hour immersion torture test" to provide an "insurance" for it:

Immersive Leak Detection: The assembled airbag is submerged in water, with continuous monitoring for 24 hours. Once there is a tiny air leak, bubbles will immediately expose it —— this is the most direct and strict detection method.

Paying for "Zero Failure": The high-end airbags and struts in MAXLOAD kits have stricter tolerance control. This means you won’t encounter troubles like "premature air leakage" or "driving noise" —— after all, we can’t tolerate a 0.01mm deviation, let alone let "air leakage" ruin the driving experience.
24-hour immersion test, nipping ‘air leakage risk’ in the bud before leaving the factory

Quality Philosophy: Making "Precision" the "Invisible Confidence" of Tuning

For MAXLOAD, "high quality" is not a slogan, but a set of "from parts to kits" precision logic:

Underlying Logic of Adaptability: Because each part is precisely controllable, configurations for different vehicle models can be "perfectly matched". Whether it’s an SUV or a supercar, the MAXLOAD suspension can "fit seamlessly", allowing stance and performance to coexist.

"Peace of Mind Commitment" to Car Owners: When you install the MAXLOAD kit, you feel not only the "coolness of low stance" but also the "stability of reliability" —— behind this is the trust accumulated by countless parts in millimeter-level inspections and 24-hour immersion tests.

Conclusion: Precision is Another "Stance" of Tuning

Some people think tuning is about "being cool", but MAXLOAD wants you to see: True "coolness" lies in the seriousness towards every part. From 0.01mm dimension control to 24-hour immersion tests, we build quality with "precision", just to make your every "ground-hugging ride" safe and thrilling.